WESTERN® MVP 3™ V-PLOW

PLOW BLADE CONSTRUCTION

The MVP 3™ flared v-plow blades soar from a 35" center height up to a full 45" at the outer edge on heavy-duty 10' 6" models.

The MVP 3 v-plow is available in 14-gauge powder coated, stainless steel, and 1/4" high-density polyethylene in 8' 6" and 9' 6" widths. 10' 6" models are available in 11-gauge powder-coated steel and 12-gauge stainless steel options.

All MVP 3 models feature a clean-scraping 70-degree attack angle, and come with a standard 6" high-carbon steel cutting edge to reduce wear and extend the life of the blade.

Structural Reinforcement

Eight vertical ribs on 8' 6", 9' 6" and 10' 6" models, combined with the exclusive WESTERN® POWER BAR, provide exceptional torsional strength and rigidity to eliminate blade twisting. The high-strength steel base channel provides extra support along the bottom of the plow blade.

A 1¼"-diameter, heat-treated steel center pin resides within a three-connection-point hinge, keeping the wings tight for optimal performance.

RELIABLE HYDRAULICS

We manufacture our own hydraulic components to ensure the highest standards of quality and reliability, so that you get a hydraulics system that's not only fast and responsive, but that's built to last season after season.

Fully enclosed components are protected from the elements.

Trip Protection

Each blade features independent trip-edge design with heavy-duty coil springs for protection when encountering bumps and obstacles. Whether in V, scoop, or straight blade configuration, the trip edge helps protect the plow, the truck, and the operator. Since only the edge trips, snow remains in front of the blade, so you can keep going without spilling the entire load of snow.

Double-Acting Cylinders

As a standard feature on the MVP 3™, UltraLock double-acting cylinders allow the operator to use the v-plow in straight blade mode by locking the wings together instead of having to toggle each wing independently.

The double-acting cylinders also hold the wings firmly in place for clean, efficient back dragging.

Steel Center Gap Cover

For the cleanest pass in any position, the MVP 3™ v-plow has a snow control deflector over the center hinge to help prevent snow from being lost over the top.

10' 6" Heavy-duty Features

10' 6" MVP 3™ v-plow models come standard with specific heavy-duty features.

Blade Construction: Thicker moldboards and a more robust base angle with additional hinge points.

Heavy-Duty T-Frame: Features a solid, one piece construction, from front to back, and an oscillating pivot bar.

Standard Blade Angle Stops: Designed to transfer extreme impacts throughout the blade's structure and reduce stress on the hydraulic rams.

Standard Curb Guards: Constructed of abrasion-resistant material and designed to fit tight to the blade, these curb guards protect the outer edge of the plow from wear when plowing along sidewalks and curbs.

Tractor Compatible Mount Kit

Designed for easy installation onto a wide range of tractor models, these mount kits make it possible for the MVP 3 v-plows to fit on a compact tractor. They are flared both vertically and horizontally to ensure proper alignment and make the drive-in connection easier. The push beam, which makes up the front portion of the mount, can be quickly detached to allow for a loader attachment.